Obviously one of the biggest topics of Computex this year is DDR4. Crucial will be bringing their DDR4 to the consumer market under the Ballistix Elite brand with speeds of 2666MHz and 3000MHz in the beginning. The modules themselves will be 4GB or 8GB at first, although kits will range all the way to up to 32GB (4x8GB). The latencies are still up in the air as the product isn't finalized yet but from what I have heard the latencies will be about CL15 at first, although it's certainly possible that there will be different models with different latencies available. Availability is slated for August but pricing has yet to be announced. 

The big thing about DDR4 is that it comes with a lower voltage of 1.2V compared to 1.5V that DDR3 uses by standard. That will result in lower power consumption, which ultimately means longer battery life for mobile devices. In addition, DDR4 is also bringing higher speeds because right at the beginning we are going to see products at 3000MHz, although Crucial told me that they have been able to get the modules to run at up to 3200MHz, so we might see even faster modules pretty soon. DDR4 will also bring support for higher densities (4Gb vs 1Gb), which will allow bigger for higher capacity DIMMs. While Crucial's offerings will be limited to 8GB at launch, they (well, Micron) has quad rank server DIMMs that go to up to 32GB but only at 2133MHz. 

In addition to DDR4, Crucial also had the MX100 at their suite. We already reviewed the drive earlier this week when it officially launched, so there isn't really anything new to share, but Crucial was able to tell me that they are working on an SSD toolbox that should be available within a few months (I was told around September). This has been one of the only things missing from Crucial's SSDs, so it's great to see that they are responding to the public demand. The supply of MX100 should also be a lot better than the M500 when it launched, meaning that you shouldn't see any sold out tags at every retailer. 


Comments Locked


View All Comments

  • Homeles - Wednesday, June 4, 2014 - link

    The uneven pin length Crucial was talking about is much more visible in this photo.
  • yrral - Wednesday, June 4, 2014 - link

    Can you explain the rationale behind the uneven pin lengths?
  • NXTwoThou - Wednesday, June 4, 2014 - link

    Probably how to prevent you from putting DDR3 into the same slot. To reduce cost, they might be retaining the same layout, the only thing you'd have to do in production of the slot would be a slight change to the plastic to raise the edges up and then a slight change in production of the memory to no longer be square. You try and put DDR3 in, it wouldn't be able to seat down due to the raised edges.
  • DanNeely - Wednesday, June 4, 2014 - link

    The notch being misaligned would result in the dimm being much farther out of socket than the tiny curve would; and there're strait edge ddr4 dimms so just the shape can't be the reason.

  • DanNeely - Wednesday, June 4, 2014 - link

    Probably to make inserting it easier in a tight slot since you're only forcing the initial insert on a part of the dimm at a time.
  • extide - Wednesday, June 4, 2014 - link

    Bingo ^^ This is why.
  • Scabies - Wednesday, June 4, 2014 - link

    So it begins (finally!)
  • hughlle - Wednesday, June 4, 2014 - link

    Speak for yourself. Doesn't interest me in the slightest. Still havn't been given a reason to upgrade beyond core2quad and ddr2.
  • dylan522p - Wednesday, June 4, 2014 - link

    That's cause you don't need the performance. You CPU is actually weaker than an i3 in multithreaded and gets bent in single threaded.
  • designerfx - Wednesday, June 4, 2014 - link

    I'm genuinely happy to see it myself, but I would expect that it is definitely going to be a while before it's affordable and commonplace.

Log in

Don't have an account? Sign up now